{"product_id":"2016-19-defender-hd10-stage-1-lock-and-load-kit","title":"2019-Up Ryker 900 Stage 1 Lock \u0026 Load Kit","description":"\u003cp\u003eFits 2019-Up Can-Am Ryker Models Kit Includes: PV3 Tuner, AA 1082 Helix \u0026amp; Orange Secondary Spring Lock \u0026amp; Load! �This Stage 1 kit provide a nice increase in horsepower and torque simplified into an easy and affordable package. �Tuning and clutching on the Ryker go together like high powered rifles and tannerite. �Together they pack a huge punch for the ultimate power gains to the wheel. �This package features AA's performance tunes loaded directly on the Powervision ECU tuner! �This versatile tuner allows our tunes to easily be uploaded to your factory ECU, switch between tunes, and even return to stock. �The Powervision is also a great gauge showing throttle position, timing and more. You can leave the PV hooked up for gauges, or completely remove it after flashing your ECU. The PV also has excellent data logging capabilities if you download the software, and use your laptop. �You can even view trouble codes and erase them on the fly. �We are highly experienced in tuning all types of machines and have spent countless hours testing our house Ryker on the Dyno and the streets. Our tunes are simply set up correctly and everyone with a Powervision should have these tunes! They are also easily labeled and will show rough horsepower claims with supporting mods such as exhaust and clutching. These tunes modify all the necessary maps to create big horsepower, while still maintaining a reliable and safe Ryker. �Each tune is built specifically for your Powervision.�This package also features our Stage 1 clutch kit!! You'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner.  We have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world. �We know you'll be extremely pleased with the performance gain from our clutch kits! � Not just dyno tested! We are avid riders and like the factory, a ton of the testing is done on the street to make sure you are getting 110%. �With data logging capabilities you can't get any better testing than real world.  Often times we can make significant changes to further increase power, drivability, and feel of the machine that can never be done on the dyno. Quicker throttle response and power delivery Throttle by wire tables are modified for better response� Torque calculations set correctly to ensure the most performance at all times Fuel tables modified to gain low end punch and safe yet powerful air\/fuel ratios Timing tables modified for best power per tune. Fan on\/off temps lowered from factory Safety parameters to protect your motor are still in place Powervision flash tuner reprograms your ECU in roughly 8-10 minutes per flash over the diagnostic port Easily return back to stock, switch tunes, or upgrade tunes at any time A great gauge (see live engine parameters) and data logging device Level 1: Stock Exhaust Systems Meant for stock exhaust systems only (91 Octane) Level 2: Aftermarket Exhaust Meant for aftermarket slip-on\/full exhaust systems only (91 Octane) Wondering why go with our tune(s) over the DynoJet tunes? We go the extra mile to make sure everything is gained, and have a few extra tricks up our sleeve because we test in the real world. Other maps take their time to hit peak timing numbers which really hurts performance. Our map gets you into peak timing quicker, so max power seems more instant. We also have a great fuel curve that is designed to go with our timing curve, and offers better fueling for more power at WOT. Basically, this is the all out tune that has all the features you want built right into it.� For even more information on the products listed in this kit, see their individual product listings. PV3 quick install video \u0026amp; setup to make sure you are running correctly: PV3 Can Am Video If you have any other needs in the tunes or concerns please e-mail or call. Part Number: 113-1039-1\u003c\/p\u003e","brand":"Aftermarket Assassins","offers":[{"title":"Default Title","offer_id":42315588468818,"sku":"113-1039-1","price":945.0,"currency_code":"USD","in_stock":false},{"title":"2019","offer_id":42279015055442,"sku":"113-1039-1","price":945.0,"currency_code":"USD","in_stock":false},{"title":"2020","offer_id":42315588501586,"sku":"113-1039-1","price":945.0,"currency_code":"USD","in_stock":false},{"title":"2021","offer_id":42315588534354,"sku":"113-1039-1","price":945.0,"currency_code":"USD","in_stock":false},{"title":"2022","offer_id":42315588567122,"sku":"113-1039-1","price":945.0,"currency_code":"USD","in_stock":false},{"title":"2023","offer_id":42315588599890,"sku":"113-1039-1","price":945.0,"currency_code":"USD","in_stock":false},{"title":"2024","offer_id":42315588632658,"sku":"113-1039-1","price":945.0,"currency_code":"USD","in_stock":false}],"url":"https:\/\/9inet2motorsports.com\/products\/2016-19-defender-hd10-stage-1-lock-and-load-kit","provider":"9INET2 Motorsports","version":"1.0","type":"link"}